Tool Retention

The removable tool lanyard keeper is quite simply perfect for use with any harness where a tool tethering or karabiner parking requirement is needed. It simply attaches by Velcro around the webbing of the harness and is as simple as that. The fact that it uses Velcro will also mean that should you take a fall and your tool gets caught up on the structure the tear out force will ensure you are not injured by hanging you from that point.

The TS 90 001 14 tool holding karabiner attaches to your harness and has a self-closing spring operated gate and stabilising clips. It can be used to attach tools up to 20kg.

These harness attachments must not be used as a rescue or fall arrest attachment point.

A range of tethering options that can be quickly attached to your tools to provide anchor points.

• D-ring attachment that can be placed on a belt or used with self-merging tape.
• Tool-holding D-ring with webbing loop for tools up to 2.25kg
• Tool-holding wire loop with stopper for attachment to tools having a maximum diameter hole of 7mm suitable for tools up to 0.9kg.
• Openable tool-holding wire to create an attachment point for items that have a hole in the handle which are rated to 1.35kg.

We offer a complete solution that can be quickly attached to your tools to provide anchor points.

• D-ring attachments for tools under 2.3kg using quick wrap tape that adapts to the shape of whatever it is applied to. This self-fusing silicone rubber leaves no residue when removed.
• Tool cinch attachments for tools and equipment up to 15.9kg that have stabilisation wings that can be used in conjunction with the quick wrap tape.
• D-ring cords where there is a pre-drilled hole or closed handle for quick attachment. Suitable for tools up to 2.3kg
• Quick Spin attachments with swivel tops that slide on to tool handles. These are re-usable and suitable for non-conductive use.
• Attachment 'D' ring with integrated webbing that can be installed on the belt or tool. Suitable for tools up to 10kg (2kg maximum if used with self-merging silicone tape.)

A selection of lanyards to easily tether your tools to your harness or other suitable connection point.

• Mini coil tool lanyard with a swivel connector and a detachable attachment loop rated for tools up to 0.9kg
• Coil tool lanyard with integrated karabiners for connecting tools to a tool-holding point on the harness or the belt of the user for tools up to 0.9kg
• Wristband with lanyard for connecting tools with a load rating up to 2.0kg.
• Stretch lanyard for connecting tools up to 10.0kg
• Stretch lanyard with integrated karabiners for connecting tools up to 5.0kg
• Stretch lanyard with pull cord blocker for tools up to 5kg
• Forked stretch lanyard with pull cord blocker for attaching 2 tools up to 5kg each

A range of lanyards to easily tether your tools to your harness or other suitable connection point.

• Hook2Loop lanyards that have aluminium double-action twist-lock karabiners to prevent accidental opening. They are available with a load rating up to 36.3kg.
• Trigger to Trigger lanyards with thumb controlled trigger snaps with swivel for tangle resistance.
• Hook2Loop bungee tethers with aluminium double-action twist-lock karabiners and available with a load rating up to 15.9kg.
• Bungee Tethers with aluminium double-action twist-lock karabiners and load ratings of up to 15.9kg.

In addition to purchasing tool-tethering equipment individually there are two kits available.

11 piece kit consisting of:

• 2 x Stretch Tool Lanyard
• 4 x D-Ring Attachment with Webbing
• 1 x Self Merging Tape
• 2 x Openable Tool-Holding Wire Loops
• 2 x Tool-Holding D-Ring on Webbing with Integrated Hanging Loop

7 piece kit consisting of:

• 1 x Stretch Lanyard
• 3 x Openable Tool-Holding Wire Loops
• 1 x Stretch Lanyard with Integrated Karabiners
• 1 x Mini Coil Tool Lanyard with Swivel Connector
• 1 x Wristband with Lanyard for Connecting Tools

Compact coil tethers for quickly securing smaller items such as hard hats, phones and hand tools.

• Clip2Loop coil tether provides a secure method of tethering cameras, cell phones, radios and other small objects.
• Hard Hat tether has a compact design that keeps it out of the way of the user.
• Hook2Hook coil tethers with a relaxed length of 12.7cm and a stretched length of 157.5cm
• Trigger2Trigger coil tether is perfect for use with wristbands and small tools.
• Adjustable wristband with a hook and loop systems to fit any wrist size.

Keep your equipment close to hand with a tool holster.

• Single and dual tool holsters that have d-rings load rated for 2.3kg. The have hi-vis reflectors and a powerful magnetic staging systems to allow your tools to simply stick to the holster. They have a bottom drain to help keep the holster dry and protect your tools from rusting.
• Adjustable Radio holster that adjusts to fit most handheld radios, mobile phones and other devices. They can be attached to your belt or harness.
• Small Parts Pouches that have a self-closure system that traps object inside and makes them nearly impossible to fall out. As no opening or closing is required parts are still easy to retrieve. They have belt loops and are compatible with most tool belts.

Safe Buckets are available with either a drawstring top or a hook and loop closure system which helps to prevent accidental drops. They come in heavy duty canvas and vinyl options with a capacity of 1840³.

Both bucket options have a hard composite plate sewn into the bottom to protect them from accidental punctures and a protective sleeve. The handle on the buckets is heavy-duty webbing with aluminium twist-lock karabiners load rated for 30kN.

They include multiple connection points inside the bucket for tethering to.

A Safe Bucket insert is available to make it easier to stage tools from. Four inner pockets are built in allowing tools to be quickly selected and holstered.